Skip to main content

Paper circuit creations: Taylor’s snake

Ryoko Ryoko
August 29, 2012
Calculating...
Paper circuit creations: Taylor’s snake

This is a continuous blog post from Jie's Paper Circuit workshop that we hosted last week.

Jie made this paper circuit as an example to show that you can change which LED is lit when the switch is pushed (there is one LED in each eye).
IMG_9450 IMG_9451
Taylor, one of our visitors from Utah, played with this sample for a while and started saying "I want to make a complex one!" At this point, she seemed to have no idea what exactly she would like to make, but a few minutes later, she surprised me with a great idea for her project.

"Can I have two different colors of LEDs in each eye so that I can get the eye color change when I press a switch?"

I was glad that our sample did give some inspirations to Taylor, and I was excited that she was not going to do the same thing with the sample but rather trying to do more challenging thing! We started to figure out together how we could put her idea onto a functional circuit.

IMG_3579 IMG_3581
Ryan started to draw out some circuit schematics to see how we could transform her idea into a real circuit. We figured out that we could make a shared negative for the two different color LEDs and put a switch on one of the negative lines.

IMG_3580
Of course, we made sure with Jie if this was the way to have two different colors (red and blue) in each eye and change from blue to red each time when pressing the switch.


And this is the circuit Taylor made!
She carefully put a pair of blue and red LEDs in two places. In the photo, it is hard to see but there is a red LED just below each of the blue LED, and each time when the switch gets closed, the red LEDs get lit up.

IMG_3614 IMG_3612
Then she added another sheet to the circuit so that she could make a snake! You can see the snake's eyes are changing the color by the switch she put on the snake's mouth.


Here is the LED colors changing in action!

photo (1) IMG_1764
Taylor was so much engaged in this activity that she stayed long to finish this project. She stayed late alone even after we closed the workshop and cleaned up the space. After spending two hours on this activity, she finished her snake project. It was just before the museum closed at 5pm.

IMG_1768
Taylor proudly holding her project!

It was amazing to see that people were engaged so much in this paper circuit activity. Like Taylor, our visitors and explainers had clear ideas what they wanted to make. So it was really fun for us as facilitators to explore the possible ways to realize their ideas together. After working with Taylor, I was convinced once again that 'desire to create' becomes a real engine for learning!

Last Friday was the last day of Jie Qi’s residency with us. It was really a wonderful two weeks working wih Jie! Thank you so much. Jie inspired all of the Tinkering Studio members in many ways. We will continue mess around with the paper electronics and share our experiments on our blog!