Skip to main content

Milan tinkering workshop - Day 3

luigi luigi
October 31, 2012
Calculating...
Milan tinkering workshop - Day 3

The final (half) day of the workshop was dedicated to setting off the chain reaction that we had worked on the previous day, and then trying to make sense of all three days of playing, working, and thinking, and perhaps come up with some possible next steps for the various participating museums. I will post a video of the final chain reaction next week, but meanwhile, in trying to pick some images to share, I thought I'd use an issue that came up during the final discussion. Luca asked how often, in our experience, do people in these kinds of activities come up with novel solutions, something we have never seen before.

The answer is: every single time. This is perhaps one of the most powerful aspects of this work, and one that we think sets tinkering apart from other types of making activities that rely on a step-by-step approach. I think that by allowing people to take matters in their own hands, so to speak, they give themselves permission to set ambitious goals, and then find creative solutions to get there. Here are only some (there are more, I promise!) solutions and ideas that I had never seen done before.

Milan tinkering workshop
Water, somehow, became a common theme in this chain reaction. Marco and Eleonora created a water drop mechanism that lowered the glass and poured water down the track into a glass waiting at the bottom. A floating platform in the receiving glass was therefore lifted, completing a circuit that started the next piece of their machine.

Milan tinkering workshop
A clever re-use of a circuit boards element: the animated toy part flicked a counter-weighed ladle that threw a ping-pong ball against a piece of foam, setting off the next bit. But, continuing the movement, it also kept ringing the bell for the rest of the chain reaction run!

Milan tinkering workshop
Repurposing a toy part dissected the previous day: these used to be animated ears from a bunny, but with the addition of thumb tacks they became the perfect balloon popping device. The balloon held a metal ball that went on to trigger the next contraption.

Milan tinkering workshop
Three balls were released one by one down the ramp, so that they would hit the fork singly, and each time cause it to strike the spoon, complete a circuit, and flash the light bulb under the plastic martini glass in the background. Disco tinkering!

Milan tinkering workshop
Those same three balls then fell into this glass, raising a floater (missing from the picture) just enough to complete a circuit with the washers you see here.

Milan tinkering workshop
After trying for a long time to fashion a sail and a wind-making device to push their raft across the water, Michela and Francesca turned the concept around in their heads, and came up with a winching mechanism that would pull the little octopus across instead.

Milan tinkering workshop
This hand-molded capacitive "finger" was carefully set to fall onto the call button, on Francesco's smart phone, that would call Stefano's phone, set to vibrate. As if that wasn't clever enough, Francesco also worked out a home-made spring so that, after hitting the screen, the finger would bounce off it, so that the call would actually go through. Also, notice how they insisted to have their table physically separate from the previous one, to drive home the point that the final piece of the machine could, in theory, be anywhere in the world.

Milan tinkering workshop
Of course, on the other end, Stefano had to mod his phone so it would slide along a track when vibrating, and completed a circuit with its foil-wrapped bottom. Those craft sticks are actually hot-glued to the phone case, making the modification irreversible...

Milan tinkering workshop
But as much fun and creative as the chain reaction was, as you will see from the video, one of the most rewarding moments of the entire workshop, for me, came afterwards, when participants split into groups according to the museum they came from and started brainstorming next possible steps to begin doing tinkering at their institutions. We were so encouraged by the fact that all the suggestions were right on point, and focused on building a community, within each institution, that supports and champions tinkering, as well as presenting it as an "experiment," something to try, instead of the new way to do everything.

Milan tinkering workshop
So thanks to this amazing and brave group of museum educators for throwing themselves into unfamiliar territory with an open mind and busy hands. I am sure we will see a blossoming of tinkering activities in Italian museums as a result of their hard work. Now, if we could only come up with a good translation for the term...