Last week, Karen shared an inspiring image of a rubber band powered drawing machine that had been posted on make magazine's website. It immediately reminded us of scribbling machines, an activity where an offset motor provides the vibrations to create interesting marker patterns on paper, but a more simple low-tech version of a mechanical mark making machine. We thought that the slow moving contraption had a really compelling motion so we decided to see if we could make a more "tinkerable" version with materials we could find around the learning studio.
We looked up the All Lovely Stuff website and found a photo of all the components. We had clothespins, markers, skewers and rubber bands in the learning studio and could sub out a used plastic wire spool for the more beautiful wooden version used in the kit. The hard part to figure out was what to use for the circular piece of wax that lets the spool and clothespin move independently from each other. We first tried a thick foamie but there was too much friction so in the next iteration, we tried out a tea light candle which ended up working pretty good (although as the video shows, Lianna still preferred the more chaotic motion of the traditional scribbling machine).
We weren't totally happy with the candle solution though, because the paraffin wax was a little too soft and ended up leaving little white shavings all over the drawing. So we ended up constructing a makeshift double boiler to create our own specialty part for our machine. We started with synthetic beeswax but that proved to be too sticky, so possibly inspired by this classic sesame street video we decided to melt crayons to make the wax disc.
This ended up being a pretty good solution although it was a little bit brittle and tended to break in half easily. For the next version we came up with a mix of crayon and candle wax which made for a better consistency. Once we had a good prototype that we knew how to make, we started thinking about what variables we could change if we ended up wanting to try this on the floor in the tinkering studio with visitors. I could imagine modifying the size and shape of the wheels, adding weights to change the balance, and working with other types of arms that could hold multiple markers at once. All these changes would allow visitors to explore the contraption in a less step-by-step construction and more of an experimentation with the phenomenon through building little drawing machines.


