Skip to main content

Slow Moving Motor Repair

Kitundu
March 3, 2014
Calculating...
Slow Moving Motor Repair

Luigi recently blogged about a broken-down slow moving motor. I wanted to take a crack at repairing it and had visions of machining a faux gold tooth out of brass for it...

This is what happened instead.


The motor as it was, two busted teeth and intermittent go/no-go motion.

Slow moving motor dissection
Luigi retrieved the gear with dental issues.

Mind the gap
I set upon that gear with a band saw and fine-tuned my work with a hand file, creating a void for some yet-to-be-discovered implant.

Digital Realm
Our laser cutter and design software came in handy. They allowed me to sketch an initial version, and then try and try again until it fit. I thought a piece of acrylic might do the trick. Calipers were really helpful when transferring dimensions into the digital world.

Implant
Once the piece fit (a tight press fit) I took a soldering iron and melted it into place, pulling across the seams to melt/weld them together.

Narrow but good
The replacement was narrower than the original teeth but I though these stylish gnashers might hold up anyway. Worth a try isn't it?


The result was a smooth, click-free, working motor and a nice sense of achievement. Like Luigi said, these motors are discontinued so saving them when we can is a good idea. Who knows if the repair will last, but at least we know the the end is NOT the end when there is a tinkerer about.

Loose Teeth
For someone who is afraid of the dentist this was a safe way for me to practice tooth replacement. I'll save these loose practice teeth in case I need them. Maybe I should open up my own practice... mwah ha ha ha.