Skip to main content

TSC: Making Musical Instruments Recap

luigi luigi
April 29, 2014
Calculating...
TSC: Making Musical Instruments Recap

Tinkering Social Club: Making Musical Instruments

Last week's Tinkering Social Club was all about sound: what it is, and how can you make a simple musical instrument that will play one or more notes that sound nice. It was led by Modesto Tamez, a veteran of the Exploratorium's Teacher Institute, who has thought about the nature of sound for a long long time.

Tinkering Social Club: Making Musical Instruments

The exploration began very simply with the "fastest lecture on what sound is," a quick and understandable run-down of sound in under two minutes.

Tinkering Social Club: Making Musical Instruments

Then we started messing about with plastic straws, shaping one end so that it would act as a reed and vibrate when you blow through it.

Tinkering Social Club: Making Musical Instruments

This is an acquired skill, and definitely required a bit of practice and paying close attention to the feedback coming from the straw. Too much or too little pressure do not work, but after some time most people were able to get a steady sound out of nothing more elaborate than a plastic straw!

Tinkering Social Club: Making Musical Instruments

Next up was thinking about amplification, to make the sound louder. Again, cheap and simple materials were all that was needed, and a basic cone at the end of the "straw oboe" made a huge difference in the loudness of the instrument.

Tinkering Social Club: Making Musical Instruments

This is essentially the inverse of using your cupped hands to amplify the sound coming into your ear, and akin to making a cone with your hands to boost your own voice.

Tinkering Social Club: Making Musical Instruments

But we didn't stop there! Modesto showed people how to saw off a section of PVC pipe, close off one end with a finger cut off from a plastic glove connected to a piece of straw, and create what he calls a Membranophone.

Tinkering Social Club: Making Musical Instruments

They sound surprisingly good, considering the materials they are made off. Drilling some holes along the length of the PVC pipe allows you to make different notes, and in short order you have a fully functional musical instrument made from scratch!

Tinkering Social Club: Making Musical Instruments

In fact, Walter was so inspired by a "bassoon" version that Tim Hunkin had made a few days earlier while we were tinkering with the stuff, that he made an improved version of it that sounds just like a bass clarinet. An impromptu membranophone battle ensued between Walter and Modesto, to close another amazing Tinkering Social Club.

Tinkering Social Club is possible through the generous support of Autodesk.