Skip to main content

A small, good tip about alligator clips

Ryoko Ryoko
May 2, 2014
Calculating...
A small, good tip about alligator clips

photo(52)
We use alligator clips almost everyday for the activities in the tinkering studio or for our prototyping. Alligator clips are great for making a temporary electrical connection to test a circuit.

But often, we find a rubber sleeve of an alligator clip slipping off like this.
photo(50) photo(49)
When I see this, I always try to put it back, but that has been one of my least favorite things to do (!) in the tinkering studio because it takes time and does not go so easy. I had not found a better way to do it until I saw how Walter does it.




IMG_0570
Ok, this is how I have been doing for the last many many years: I squeeze the grip hard and try to pull the sleeve back on the clip. Sometimes, I was even using a plier to squeeze the clip while I was trying to pull the sleeve back. It was not easy.




Here is how Walter does.
IMG_0571
He just let the clip bite the other end and smoothly slide back the sleeve onto the clip. It is so easy! The nice thing is that you don’t need any other things to do this. It is such a simple and self-contained solution! For me, this was an ah-ha moment in two levels: 1) letting the clip bite other things so you don't have to squeeze. 2) using the other end for biting!

After the finding, I did a little survey in the tinkering studio to see how many people already knew this technique. The result is that two people out of nine have been doing this already (so with those two, my joy of the discovery couldn't get shared), and I also found some people use their finger for the clip biting... (isn't it hurting??) but anyway it was interesting to see what/how other people deal with this kind of everyday situations with alligator clips.

This might sound like such a small tip for you, but it already made my life in the tinkering studio a lot easier since then. I promise this tip will make your life easier. Try it sometime.