While Ryan was facilitating chain reaction at ECSITE in The Hague, Nicole, Karen, Mike, and I were getting the booth ready for the Polytechnic Museum Festival in Moscow. It was our first time setting up a chain reaction space outdoors, so there were lots of elements we experimented with and learned from over the course of the two day festival.
For starters, the weather was unseasonably hot for Moscow in May. Since participants often spend an hour or more building their chian reaction contraptions, it was important we had a tent set up to protect them from the sun. On Saturday we noticed that the tent walls were trapping some of the heat in, so for Sunday we gathered the panels like curtains. They still helped to provide a visual and physical barrier to protect the space, but allowed more airflow to keep the tent comfortable.
When we set up chain reaction workshops, we often start with table placement. We like to experiment with creating serpentine shapes that inspire building that is less linear. After experimenting with a few different configurations, we realized that with the limited space under the tent it would be hard to go back and forth from the materials to the far side of the work tables. To solve this issue we left a gap in the chain reaction. This space was a passageway while people built, and we could quickly drop in a piece of V-shaped track and a heavy marble to fill the void when it was time to set the chain reaction off. Our awesome volunteer facilitators explained this constraint to people working at the tables adjacent to the gap so they were able to test and refine their designs incorporating this element.

One challenge of working outside is that the patch of grass we were on was slightly uneven. Little bumps and hills in the grass meant that, at times, the tables weren't level with each other. At first we tried using pieces of scrap wood to attach the tables together from underneath but we realized that when they were all attached, if you bumped one you bumped them all. Not so good when you're building fragile machines that often have precariously placed elements! We ended up using pieces of scrap wood as shims to prop the table legs and get them close to similar heights. We had each transition marked with arrows and the words "input" and "output" (in Russian, of course). Although they weren't all perfectly aligned in the end, the weight of the domino blocks was enough to overcome any small inconsistencies in height and they worked beautifully.
Another element we included at each table was an inspiring object to spark ideas for building. Approaching a completely blank table can be overwhelming; these objects helped to give the facilitators a place to start and allow the builders to begin experimenting right away. Sometimes the pieces would be discarded, but often times they became the central element of the contraption.
We set out the main materials on one side of the booth grouped by type. Tanya made posters to indicate what types of materials could be found at each table. The rough groupings were mechanical & circuit parts, elements to attach things, building supplies, and inspiring stuff. This helped participants narrow down where to look for their next element, and helped us clean up the materials between each session.

We set up two tables for cutting, sawing, drilling, and gluing on the opposite side of the tent from the materials tables.
Once we opened we noticed that the space began to fill with participants really quickly. Tanya made a sign on the fly to hang at our entrance gate indicating that the workshop was full. The roped off entry and a low barrier around the perimeter of the tent allowed us to regulate how many participants could enter the tent and protected works in progress from unknowingly getting disturbed by people wandering through.
One of my favorite things I noticed is that after people finished building, perhaps inspired by the example table we had set up at the front of the booth, they added annotated elements of what happened at each step in the chain reaction. Some people even included illustrations of the elements as well! Improvised "Do Not Disturb" signs were another common element among the tables that finished first.
When it was time to set the chain reaction off, Mike would announce what was happening and one of our volunteers would translate. The were always huge crowds gathered to observe! One thing that was nice about the arrangement of the worktables and finale is that there was something for everyone to see. For people near the entrance of the tent it may have been hard to see the individual chain reaction elements, but it was easy to turn around and see the finale. The Polytechnic Museum provided a videocamera and monitor that could also capture what was happening up close and display it so people farther away could see the detailed mechanisms everyone created.
I'm sure if we had a week to host workshops, there would be even more things we'd experiment with and tweak to create an ideal space for building outside. Over the two days, we learned so much about facilitating abroad, and I can't wait for our next opportunity to have another chain reaction workshop!













