After the chain reaction workshop on the first day of Ecsite conference in The Hague, our plan was to continue to allow people to work on the machine over the next two days before we set off the entire chain reaction at the end of the last session on Saturday. I was a little nervous about this plan since usually when we do this activity we have a set amount of time, the building space is more protected, and most participants get to be there for the full "performance" of the machine from start to finish.
We had three "general making sessions" on the program for the conference and in each one of these we gave a quick presentation of the activities and tools available including the option to work on a part of the chain reaction machine. We left a few "example" sections from the first day's workshop but cleared some or all of the elements from most of the spaces so that new groups could come and work at the tables.
Some participants seemed to be content working out small individual problems without needing to think about the entire reaction. They took a spot at the table, worked on something for a few minutes and then moved on to something else in the makerspace.
Other spent the entire hour and a half session working on a single element of the chain reaction. Several groups stayed past the official close of the space. We could tell that they felt proud of their accomplishment without needing to see the complete system go. If a group got a section completed, we asked them to label it with their names so it would be off limits to other builders. For those who only got part way through we left their table "open" for new groups to continue.
We also continued to run panels and presentations for the next two days of the conference and for the most part the pieces of the chain reaction didn't interfere with the use of the space and didn't get too damaged from the other activity.
People came up with some really creative solutions and I think were helped by being surrounded by all the other inspiring elements of the space. I especially liked this mechanism which used the magnet on the clothespin to repel another one on the domino to knock it down without physically touching it.
Wiktor, one of the presenters from the morning session, left a rubber chicken in the room and in got incorporated into the chain reaction.
I think because we had a limited selection of materials, we saw some more creative ideas. I especially liked this group who cut up some metallic pipe cleaners to be confetti inside a balloon in the first section of the chain reaction.
There were a few kids who came by the makerspace with their parents that were attending the conference. A ten-year-old named Rico came by and worked on his own section of the chain reaction. After he got his piece to work consistently, he started facilitating some of the others, giving them helpful hints and encouragement.
As the session came to a close, we asked those who built a section to share something about their construction with the group. The room filled up with conference goers as we prepared to set off the machine.
Ian Russell reached over the crowds and took one of the best videos of the chain reaction and thankfully posted it on youtube.
I think the chain reaction ended up working better than most because it was made in a more collaborative working environment. By the end of the last session, everyone shared responsibility for making sure that each part of the machine went smoothly even if it was 'someone else's' portion.
I was happy that we were able to allow conference goers to participate in a tinkering activity with a specialized environment, in-depth facilitation, and a large selection of materials. At least a few people told me that they would plan to try out chain reaction back that their museum.
I also left inspired to think differently about how we might lead the activity in the tinkering studio. I'd like to continue experimenting with a more open working environment where multiple groups could share table space. I thought having the laser cutter available led to some interesting solutions to problems and nice personal additions. And maybe if others try out this activity at their museums we could try having multiple chain reactions around the world that connected through wifi, phone or some other creative means.
Overall, it was great to stretch the limits of what we could do in the makerspace at the conference. I'm looking forward to see what we come up with for next year in Trento.









