Skip to main content

CoP Spotlight on a Space

Ryan Ryan
June 30, 2014
Calculating...
CoP Spotlight on a Space

Last week we took the "community of practice" on a video tour of the tinkering studio, showing off some of the spaces we have created at the Explorattorium to allow staff and visitors to mess with materials, use tools, and engage in making and tinkering.

The 'hangout' doesn't record the video that we took walking around the gallery with our laptops, but it recorded the audio over a prepared slideshow. If you haven't been to the Exploratorium, this can at least give you a sense of some of our environments for tinkering.

After the virtual tour participants wrote in with some questions about how we operate and support our programs in the tinkering studio. Here are our answers to some of these questions.

Light Play in the Tinkering Studio

"Hi, I had one, how long does an activity stay in the tinkering studio, does it change daily?"

Luigi - We usually rotate through two or three activities in the space throughout the week. One of them is our current “deep dive” activity—right now this is Cardboard Automata—which means we are paying particular attention to it in terms of facilitation, design, environmental treatment, etc. When the deep dive activity is being offered, it is facilitated by core Tinkering Studio staff paired with an explainer, and we have regular group meetings and R&D time devoted to improving all aspect of that activity. This process takes a couple of months, after which we switch to a new “deep dive” activity.

Other days of the week we rotate through other activities that have already gone through this process, and these are normally mostly facilitated by Explainers who have already had the opportunity to work on them with Tinkering Studio staff first.

Opening at Pier 15

"How many can sit at the dogbone table and how do you manage extra people who want to join in - give them a time to return? Sign-up?"

Lianna -Depending on the activity, the full dog bone table can comfortably accommodate 8-12 people. It can also be broken up into other configurations (we call them ghost, mushroom, and circle) to divide up how people move through and use the space. We try to provide clear signage to communicate what activity is going on, what hours it's open, and any age limits. Recently we've experimented with posting a max capacity and minimum time to participate (for a 60+ minute activity), and both seem to have helped with setting those expectations for visitors up front.

Once the space is full, we hang a sign on our gate to let people no there are no spaces at that time. We run the workshops on a drop-in basis, so if someone comes up and there isn't room, we offer a suggestion of about how much time we think there will be before room is available. Sometimes people will wait if it's a shorter activity or someone is almost done, other times they'll leave and come back. We also try to have related exhibits in the Tinkering Studio so they can try those when there's no room (this is also good for instances where the visitor is too young to participate).

Copper Crowns

"How do you manage safety logistics in your workspace with artists, Explainers, staff, kids using potentially dangerous tools and equipment? Do they require special training or sign liability waivers?"

Mike - We take safety seriously, and spend a lot of time planning and practicing the safe use of tools and materials as makers and educators. We have a documented set of guidelines that we follow when we are using sharp, hot, messy, and dangerous things, and we make sure to have safety gear and band-aids on hand while we are doing these things (could we link this doc?). Here are a couple of important things to remember:
- Make it stable: accidents happen when the things you are cutting or drilling into are not clamped in place. We make sure to have all sorts of clamps and "helping hands" in the Tinkering Studio.
- Sharp tools cut the materials, dull tools tend to cut people: We make sure that we are using sharp blades, and tools that are mechanically functional, and appropriate for the task.
- Create an environment for people to succeed:we make sure that we offer good lighting, safety goggles, and work surfaces that are sturdy and large. If the tables are to high for young kids we offer stools and platforms to bring them to the right height.
- Use real tools and materials: We don't use underweight, under-sized hand tools made for children. We have children use adult tools that we ourselves use when making things.
- Pay attention to the "older" makers: we need to watch adults more carefully than the children. Adults are much more careless than children and teenagers when it comes to using tools and making things. I think part of this is because adults have more strength to "muscle through" the saw that isn't cutting properly, or the drill that is resistant to the material. That's when accidents occur, when the tool or material is forced into doing something it isn't designed to do, and children don't have the strength to force these things.

Marble Machines

"Has the inquiry driven set-up of the tinkering studio affected the way that guests interact with other exhibits at the Exploratorium? Are they asking deeper questions and interacting with the exhibits in more meaningful ways?"

Luigi - It’s a hard question to answer for two reasons: one is that the whole museum is set up for inquiry-driven exploration, so it’s difficult to discern whether playing the Tinkering Studio has an effect; and two is that we don’t get to follow visitors around the space after they leave the TS.

We have had instances, however, of visitors using exhibits “creatively” in the Tinkering Studio, for example borrowing materials from one exhibit to use in the workshop, or viceversa, or migrating materials from one exhibit to another.