Skip to main content

Parallel Switches and the California 3 Way

lianna lianna
July 11, 2014
Calculating...
Parallel Switches and the California 3 Way

Last week I was reading the forums for our Coursera Fundamentals of Tinkering Class, and I found a post called "Parallel Switches" that caught my attention. The screen grab below describes the participant's experience using a breadboard to build a circuit that uses two switches to turn single motor on and off.

Screen Shot 2014-07-02 at 4.23.23 PM

This post immediately reminded me of a similar exploration we had in the Tinkering Studio a few months ago. Adam, one of our Exploratorium colleagues, was hanging out with us in the Learning Studio discussing circuit boards and he brought up the question of creating what he called a "hallway switch." The goal was to build a circuit that could turn off a single bulb using two switches. After messing around with some circuit boards (and a little help from wikipedia) we discovered a circuit configuration called the California Three Way. We were so delighted by how elegant the solution is for something you encounter everyday and that you could make it with circuit board parts, we had our illustrator in residence Iris Gottleib  draw it out for us. Her drawing is now hanging in the Tinkering Studio as an inspiring element to accompany circuit boards.

photo-41