Skip to main content

Artist residency at Instructables - Water jetting felt

Sebastian Sebastian
September 24, 2014
Calculating...
Artist residency at Instructables - Water jetting felt

The neighbouring pier next to the Exploratorium happens to be the headquarters of Instructables, an online community focused on all forms of making and crafting. My partner and I were fortunate to be accepted to an artist residency at Instructables, a program focused on using their state of the art machine shop (Instructables AIR program).

Part of what we’re doing in our residency is experimenting with different techniques, with the intention of incorporating those discoveries into our fabrication repertoire. We like to let the inherent properties or characteristics of materials inform our work so will push on things to see what they do when treated in different ways. Early on we hit on the idea of using the waterjet machine to cut very thick, dense wool felt which is normally used for industrial applications. Felt is an amazing material, and has physical properties unlike anything else. We had tried using a laser cutter, but when you cut wool felt with a laser it smells like burned hair, and you can’t cut really dense, ½” thick material. Waterjet cutting seemed an interesting alternative, potentially clearing a path to digital fabrication using big sheets of felt. The result is even better than we imagined -- the cut edge is nice and crisp, and there’s a really satisfying tension between the machined quality of those edges and the overall softness of the material.


Sheet felt ready to be cut


The giant computer-controlled waterjet machine that we decided to employ for the felt cutting

The waterjet is usually used to cut sheets of steel, stone or glass that are submerged in water. We decided to not submerge the felt so it wouldn't get completely soaked, but what would happen when we hit the felt with a focused beam of water that exerts a force strong enough to cut steel? Here is a video:

FeltWaterjetVideo from The Tinkering Studio on Vimeo.

The water cut right through the felt and the peg board we used as a sacrificial mounting surface. After peeling off the protective tape, we held very precisely cut pieces of steaming hot, soaking wet felt in our hands. The whole process was fascinating, and popping the little felt shapes out of the surrounding material was tremendously satisfying.


The first thing we did with this new technique was build a vase out of layered felt. Check out the all the steps from design to assembly here. The rounded form was a good test of the layering concept and resulted in an enjoyable, enigmatic object. People can’t tell what it's made of when they first see it, and are nicely surprised once they figure it out.

We've continued experimenting, and are learning about the capabilities of the machine and the software used to interface with it. We've made some small shapes we plan to use in jewelry pieces, and are working on a proposal for a more ambitious project we hope to execute this fall.