Experimenting and iterating with the space design is one of the things we'd like to keep trying constantly. Last week, we have started to make some changes in the Marble Machines area. We had observed many issues in the marble machine area since our opening and had been tweaking a little bit, but never made a major environmental change in the space. One of the big issues is that the space gets messy and congested easily, and sometimes it could communicate chaos and mess and send unwelcoming message to visitors.
To tackle the issue, we started off by taking down the wing that was overhanging from the wall to make more physical space. Then, we decided to dismantle the bench too, to make the space less crowded, but also hoping that we could utilize the low wall for some inspiring/interacting use for little kids rather than parent's resting area.

Nicole removing the bench, Audrey, our volunteer from Instructables, working on cardboard to cover the wall.

Now the space looks a lot more spacious! We've covered the bottom of the wall with cardboard to see what would happen if we raise the bottom of the wall. The motivation behind that is to use the big wall for older kids and the lower wall, which is across from the big wall, for younger kids.

Since we can't install pegboards on the lower wall right away (it's a curving wall), we have put a few smaller boards (2x4') in front of the lower wall to see how people use those individual size boards. So far, we've observed that people use those individual boards a lot (sometime, we see people working only on individual boards and no one on the big wall).

Young kids, older kids, adults, I see people with all ages work on the individual boards.

One day, we've left a super long tube in the area, and we saw young kids are connecting the big wall and individual board with the tube...

One thing we've noticed is that covering the bottom of the wall might be actually encouraging little kids to stand on the step stools or on chair to reach to the wall. This might be less happening if we install something for little kids on the lower wall opposite.

Another thing is that whether or not there is a bench, the lower wall seems to provide a good spot for parents to wait/rest and keep an eye on their kids. Maybe we could install the bench for parents behind the wall?? Our plan at this point about the lower wall is to think about some interesting use, either to turn the lower wall into something for little kids or turn it into inspiring interactive marble machine walls.

We are also thinking to do something with this big opening at the back of the area (in the left photo). Since we removed the overhang, the space feels too open and feels like we need some interesting/meaningful way to interrupt the view to the main busy corridor so that the space feels a little more warm and cozy. Another thing (not so prioritized but would like to think about at some point) is to somehow utilize this square window for people's marble machine building.

And, of course, the most challenging issue has been to figure out a good way to organize the materials. Our current material cart gets empty in the first one hour and the materials are scattered all over on the floor... We don't know a good solution for that yet.
It might take a long time to iterate and redesign the space, but we are so excited to work on the project. While we keep observing the space, we are working on prototyping some interesting marble machine elements and mechanisms so we could install them somehow on the lower wall. In the next post, I will post a few prototypes that we've built so far!