We've started prototyping Chain Reaction as the next activity in the tinkering studio! Over the past few years we've tried out this activity for special events, workshops and conferences, but only as a one-time experience. It's a completely different operation to have an activity going day after day in the tinkering studio, so we'll have a long process of figuring out the best way to make the chain reactions run smoothly for both visitors and ourselves on the museum floor.
This activity, inspired by the art of Rube Goldberg and Heath Robinson, and recently taken to new levels by Pythagoras Switch and OK Go, involves a series of mechanical and electrical contraptions that link together to create a whimsical and complicated chain reaction. We usually provide a starting point and an ending point (two white dominoes) for each group to lower the threshold, but because there are so few limitations to the activity, the process of building still can be difficult and definitely takes a lot of time.
We were a little nervous about how the general museum audience (and especially school groups) would engage with the activity and unsure if people would stay long enough to complete an entire section of the chain reaction. We've seen workshops in other museums that don't emphasize completing a collective reaction but instead let each group work independently. We tried that the first couple of days but to me, it felt that without the structure of a larger collaboration it was more difficult for people to get invested in the activity.
Another thing that we've noticed is that younger kids are immediately attracted to chain reactions. It's often hard for them to move from their imaginative ideas to a discovery of how the real manipulation of the objects provided can accomplish their goals. Something that we tried in Moscow and might work well in this context is a sturdy example section that can be easily resettable. We think this might be fun for young kids to try again and again, giving them a simpler way to interact with the materials and phenomenon.
TS staff and explainers have also been experimenting with our facilitation with this activity. Because there are so many possibilities, we often have more difficulty imagining the challenges and goals that people will come up with, making it trickier to anticipate moments of failure and frustration. We've been shadowing on the floor with explainers and tending to focus on getting participants to slow down and break their problems into simpler pieces.
As well, we've found that just getting people to describe their plans often results in unexpected breakthroughs and innovative solutions. Because the workspace is so large, there are often moments where both faciliator and participants have our hands on parts of the project, leading to a kind of collaborative building process.
This week, school is out so we have mostly family groups visiting the museum which tends to result in more parents and kids working together. Also because families might stay later than most field trips, it seems more likely that people will come back to see us set-off the entire chain reaction from start to finish. We've been experimenting with building two chain reactions a day, with one set-off at 2:00 and the second at 4:00. Today we had six tables for groups to build at which felt a little crowded but mostly energizing with a sort of "good" pressure to be a part of a collaborative contraption.
TS Chain Reaction 12/22/14 from The Tinkering Studio on Vimeo.
For the last set off of the day, we had a big crowd of people gathered outside the tube wall. There was a lot of excitement in the tinkering studio as we prepared to test out the machine. I really like this part of the activity where we can celebrate the amazing mechanisms, homemade switches, and other crazy ideas created by visitors to the museum. It worked beautifully (with a little help from our magic fingers) and was a really fun end to a great day of building.
We'll be experimenting with chain reaction again tomorrow (tuesday the 23rd) and then again on monday and tuesday of next week. And of course we'll continue to post about our prototyping with this new activity here on the blog!




