Skip to main content

Table Top Chain Reaction Finale, aka Snakes in a Can!

James
March 11, 2015
Calculating...
Table Top Chain Reaction Finale, aka Snakes in a Can!

We've built quite a few chain reaction finales over the years, both big and little, because it's always nice to end on a high note. Since we started doing chain reaction on the museum floor, we've found it helps to have a table-top finale that people can build towards. We were using an alarm clock, but it went missing this week, so I started working on a new finale.

I started with one of those hokey old gags, the can of mixed nuts that is really full of snakes. I built the first version really quickly on the floor, and you can see it working (kind-of) in the very end of this lovely chain reaction.

Chain Reaction 3-11-15 from The Tinkering Studio on Vimeo.

It seemed promising, but it was unreliable, and I thought it could use a little more drama. So I swapped out the mixed nuts can for pringles, and I quadrupled the snakes. More prototyping! I had to test it before making it autonomous, of course.

snakes in a can from The Tinkering Studio on Vimeo.

Okay, it seemed pretty good! The next step was building a contraption to set it off, and release the snakes. I set a challenge for myself to make it all mechanical, and this was the result . . .

Table top chain reaction finale

There is a lever holding the snakes down, it has a spring that keeps tension on it until the brass weight is knocked off the table. The weight falls, pulls the lever and releases the snakes.

snakepringle from The Tinkering Studio on Vimeo.

Needs more snakes!