Skip to main content

Learning to Tinker

Melissa
August 28, 2015
Calculating...
Learning to Tinker

         Hello! My name is Melissa. I’m a museum studies graduate student at the University of San Francisco, and this summer it has been my privilege to intern at the Exploratorium in the Tinkering Studio. My background is in classroom education, but my present passion is museum ed. I knew I would learn a great deal about informal learning environments during my time in the Tinkering Studio. (And I did, of course!) I did not expect to learn so much about myself as a tinkerer and learner, so that’s what I’d like to write about today in the form of three overarching lessons.
 
Lesson 1: Overcoming Creativity Blocks
       I was, perhaps, most surprised at how scary tinkering can be. Working with new materials, around new people, in an unfamiliar setting can be intimidating. In my case, I found the work of my colleagues to be beautiful and intricate but beyond my capabilities. Indecision and a feeling of “Am I doing this right?” stunted my project building. I have found a combination of practice and encouragement to be the cure. Over time, I was able to come out of my shell creatively. I wish we had more time with visitors to see them through this same process, but sensitivity to their struggles is the best we can do in limited time.

       For instance, the Tinkering Studio itself is designed to be a welcoming space with plenty of light and colorful creations on display, and the Studio is only partially separated from the museum with a half-wall. For each activity, we provide a variety of examples, including complex staff-made projects, simple staff-made projects, and visitor-made projects. As a facilitator, I try to greet visitors who are looking in or passing by, and I’ll invite them to join. I also like to ask visitors “What have you been working on so far?” instead of “Do you need help?”. I will have the same opportunity to understand their process and make suggestions, but visitors won’t feel that they’re doing anything wrong.

                  Ryan's arms | by zabelmelissa         my sailboat | by zabelmelissa       

In this linkages brainstorm, Ryan made amazing arms, and I made a three-piece sailboat. I was only beginning to wrap my mind around tinkering.

Lesson 2: Consciously Iterating
       As an inexperienced tinkerer, another hurdle for me was pushing myself to make changes and improvements instead of leaving a project I deemed complete. When I first experimented with linkages, I ended up with a series of small linkages, and none of them worked very well. I suppose I was afraid to make changes because I didn’t want to mess up or waste materials. Some activities lend themselves flawlessly to iterative design. (I’m looking at you scribbling and marbles machines. If materials are held together with rubber bands and tape, that’s the easiest to change.) The TS staff have some useful techniques for encouraging iteration in the rest of the activities, and those helped me a lot. (Punching a bunch of holes in your cardboard when you first start building a linkage. Taping down your LEDs before soldering them in paper circuits.) Over time I have been able to internalize that my first draft is not my final draft. Experimentation can only make it better.
       I see visitors struggle with iteration as well. A girl might spend a lot of time decorating a top, but when she tests it, it doesn’t spin. That can be heartbreaking. I try to remind everyone I work with to Test / Change / Repeat.

scribbling | by zabelmelissa        paper circuit | by zabelmelissa
Using tape before a more permanent adhesive can allow for easier iteration.

Lesson 3: Multiple Entry Points
       If I were forced to choose, I would identify myself as a “science person” than an “art person”. So, you can imagine my surprise when I found myself drawn to experimentation for the artistic aspect. I learned that I like paper cutting, and I spent much more time cutting the paper for my linkages and paper circuits than in building the linkage or circuit. I really enjoyed embroidery. I prefer making tops if they can draw. This highlights for me the importance of activities that spark a variety of interests, or even just keeping activities in your arsenal that appeal to different passions.
       One Tinkering Studio challenge this summer has been iterating on the design of the spinning tops activity. If visitors are presented with materials that can be quickly turned into tops, the activity is not very tinkerable. (A visitor’s first prototype will likely spin well, and there won’t be much motivation to change the design.) I find inspiration in drawing tops. Changing the stability of the top and the angle of the surface on which it spins will create a different design.

2015-08-09 08.04.39 | by zabelmelissa         flat surface | by zabelmelissa         angled surface | by zabelmelissa
A drawing top; Scribble created by drawing top on a flat surface; Scribble created by drawing top on an angled surface
 

       Overall, I feel that my experiences learning to tinker have improved my skills as an activity designer and facilitator. Many visitors who enter the Tinkering Studio are new to tinkering, and they come with different levels of comfort and confidence as well as different areas of interest. My ability to relate to their perspective allows me to create a better experience for all the tinkering novices who enter the space.