Skip to main content

Cycloid Drawing Machine

Lucas Lucas
November 16, 2015
Calculating...
Cycloid Drawing Machine

Very much inspired by Joe Freedman's Cycloid Drawing Machine, we decided to build a simple version of our own. First we designed some gears, using gear generator software, which we then laser cut. The gears are set on a steel plate, using strong neodymium magnets as axes. This way the gears can be set up in different configurations very easily.
 

IMG_4902IMG_4912

Changing the two gears on which the felt pen holding bar rests, makes for totally different patterns. These are just examples of changing one of the gears (we kept the left one to 58 teeth).

IMG_4933