Skip to main content

Caffeinated Table

Two young children at a table and playing with toys.
DIY Exhibit
Caffeinated Table
An imbalanced spinner creates vibrations to make things dance.
Caffeinated Table
An imbalanced spinner creates vibrations to make things dance.

We joined forces with Community Science Workshops to design this DIY Exhibit that you can make from everyday objects for your community space.

Materials

A flat platform. With a rim, if possible.
We used a coffee tabletop.
Other things to try: a thin cutting board, a cabinet shelf

A base. It should stand stably without a top. 
We used coffee table legs.

A vibrating motor. We used a massage bed motor. Keep the power cord intact and don’t disturb the wires to ensure there’s no risk of electric shock.

Some lightweight objects. We used some cleaning brushes.
Other things to try: toys, origami.

Squishy bits with medium firmness. To dampen vibrations. We used rubber grommets. 
Other things to try: pieces of flip flops, weather strips, thick mounting tape

We also used screws and glue.  

How to Make It

Attach the motor to the platform. 

We screwed the massage table motor into the underside of the tabletop. Later, we realized our tabletop bounced too much in the middle, so we glued on 2”x2” boards and attached the motor to the boards.

 

 Attach the platform to the base. 

We sandwiched the grommets between our platform and base. We then screwed the platform, grommets, and base together, taking care not to tighten the screws too much. The screws should not poke through, and the platform should have some springiness.

 

Put the brushes on the table and plug it in.

 

What’s Going On?

What do you notice?  
What do you wonder?  
What do you want to try?

Inside the motor is a spinning axis. Attached to the axis is a weight that is not centered and causes the axis to wobble as it spins, like a washing machine with an imbalanced load. This wobbling produces vibrations. A platform vibrated by the motor can bounce objects around. 

Troubleshooting Tips
  • If the vibrations are too strong, attach some wood to the bottom of the platform for bracing. 
  • If the vibrations are too weak, use a thinner platform or a stronger motor. 
  • If the whole table bounces around on the floor, add some weight to the base or attach suction cup feet.