Skip to main content

Fog Rings

A person's hands are pressing on a plate in a tire in a pot
DIY Exhibit
Fog Rings
Create swirling rings of mist launched through a hole into the air.
Fog Rings
Create swirling rings of mist launched through a hole into the air.

We joined forces with Community Science Workshops to design this DIY Exhibit that you can make from everyday objects for your community space. This activity is based on the Exploratorium exhibit Cloud Rings.

Materials

A squishy donut-like ring. We used a wheelbarrow tire without an inner tube. 

A pan. It should be a little bigger than the squishy ring. We used an oil pan.
Other things to try: a cake pan, a bucket 

A thin sheet. It should be stiff, waterproof, and about the same size as the squishy ring. We used a plastic plate.
Other things to try: a frisbee, a piece of cardboard covered in duct tape

Something that makes mist. Or smoke. We used an ultrasonic mist maker from an aquarium. 
Other things to try: a fog machine, a pack of incense sticks, dry ice

We also used a utility knife. Be very careful when cutting things with a utility knife. Watch your fingers.

How to Make It

Put the mist maker in the pan. 

We plugged in our mist maker and set it in our oil pan.

 

 

We added just enough water to fully cover the mist maker. 

Don’t touch the water while the device is running. The ultrasonic vibrations can cause nerve pain.

Place the squishy donut-like ring in the pan. 

Our wheelbarrow tire just barely fit in our oil pan.

Cut a hole in the thin, stiff sheet and put in on the squishy thing. 

Using a utility knife, we cut a round hole a couple inches wide in the middle of our plate. 

Be very careful when cutting things with a utility knife. Watch your fingers. 
 

We put it on top of the wheelbarrow tire. 
 

Press down. 

We gently pressed on the plate to launch mist through the hole into the air
 

What’s Going On?

What do you notice?
What do you wonder?
What do you want to try?

Pressing down on the sheet pushes out vapor created by the mist maker. Friction between this vapor and the hole causes the escaping air to rotate, forming a swirling pattern called a vortex.

Air at the edge of the rising ring moves slower than air in the middle. The slower air has a higher pressure than the faster-moving air, as explained by Bernoulli’s Principle. This pressure holds the ring together as it travels upward.

Troubleshooting Tips
  • If you’re not seeing a puff of mist, check the water level in the pan. 
  • Also, make sure that your squishy thing fits snugly into your pan, so that no vapor leaks out around the edges. 
  • You might need to adjust the size of the hole in the thin, stiff sheet. We found that adding tape to smooth the edge of the hole helped.
  • If you want the puff to be more visible, try a dark background or shining a light from behind.
  • If the ring disappears quickly, check for a draft. Still air works best.
     
See It at the Exploratorium

This activity is based on the Exploratorium exhibit Cloud Rings where a swirling pattern know as a vortex is formed.