Skip to main content

String Flinger

young person watches beads moving around
DIY Exhibit
String Flinger
Channel blowing air to throw a big stringy loop around and around.
String Flinger
Channel blowing air to throw a big stringy loop around and around.

We joined forces with Community Science Workshops to design this DIY Exhibit that you can make from everyday objects for your community space. This activity is based on the Exploratorium exhibit Bicycle Rope Squirter. 

Materials

A blower. We used an air mattress pump.
Other things to try: a leaf blower, a hair dryer, a shop vac set to blow

A hard tube. It must fit onto the blower. We used a footlong acrylic tube, about an inch wide. 
Other things to try: a paper towel roll tube, a rolled-up poster, a PVC pipe 

Something stringy. We used about 10 feet of yarn.
Other things to try: twine, rope, clothesline

We also used a drill and a hot glue gun. 

How to Make It

Drill a hole near one end of the hard tube.

We made the hole about an inch from one end of our acrylic tube, angled toward the other end of the tube. We smoothed the hole by sliding a wire back and forth across it. 

 

Make a loop with the stringy thing through the hard tube.

We passed the yarn through the hole in the tube and out of the far end.

We tied a square knot with the ends of the yarn, trimming the loose ends. We tightened the knot and mashed it as flat as possible. 

 

Attach the hard tube to the blower.

We stuck the tube in the mattress pump, making sure the hole pointed down.
 

We taped the tube to the pump.

 

What’s Going On?

What do you notice?
What do you wonder?
What do you want to try?

The string creates a loop because of two different forces. The moving air pushes the string, throwing it forward, while gravity pulls the string downward. Try tilting the blower at different angles, and you will see different loop shapes as the angle between the string and gravity changes.

Try tapping the loop. What happens to the shape of the loop?

Troubleshooting Tips
  • With a weaker blower, use a smaller tube. Air rushing through a smaller tube moves faster.
  • If the stringy thing gets caught, try making the hole and the end of the tube as smooth as possible. 
  • If the knot snags on the hole, you can also try gluing the ends of the stringy thing together.
     
See It at the Exploratorium

This activity is based on the Exploratorium exhibit Bicycle Rope Squirter where loops dance along the ground as visitors play an Exploratorium-style game of jump rope.