Skip to main content

Turntable

Three children examining objects on a table.
DIY Exhibit
Turntable
A rotating surface bends the path of a ball rolling across it.
Turntable
A rotating surface bends the path of a ball rolling across it.

We joined forces with Community Science Workshops to design this DIY Exhibit that you can make from everyday objects for your community space. This activity is based on the Exploratorium exhibit Turntable.
 

Materials

Something that spins. We used a bicycle wheel.
Other things to try: a lazy Susan, a record player 

A sturdy base. We used pieces of wood.

A round platform. We cut a piece of plywood into a circle, sanding the edges and top smooth.
Other things to try: a record, a pizza pan

A mounting plate. We used a small piece of 3/4" plywood.

Small balls or rings.  We used bouncy balls and foam balls. 
Other things to try: washers, tape rolls, tangerines

We also used a drill, a 15mm socket wrench, a crescent wrench, and zip ties.
 

How to Make It

Mount the spinning thing to the base.

We used zip ties to attach small wood strips to the rim of the wheel. We checked that the wheel sat level and flat on these wood pieces. 

 

Attach the mounting plate to the spinning thing.

We drilled a large hole halfway through the center of our 3/4" plywood (using 7/8" spade bit or forstner bit). In the center of that large hole, we then drilled a smaller hole all the way through the plywood (using a 3/8" bit).

We removed the axle nut from our bicycle wheel and inserted the axle into the small hole. We screwed on the axle nut, leaving the axle just barely sticking out of the hole. 

We lined the top side of the plywood with double-stick tape.

 

Attach the platform to the mounting plate.

We drilled a shallow hole into the exact center of the platform (with a 3/8" bit).

We inserted the axle into the hole and pressed the platform and mounting plate together.  You may have to add some glue or a round spacer somewhere to keep the turntable stable and free to spin.

 

Spin the turntable and try to roll a ball across it.

 

What’s Going On?

What do you notice?  
What do you wonder?  
What do you want to try?

A ball rolling across the turntable does not move in a straight path, as viewed from above. It curves. That’s because different parts of the turntable rotate at different speeds; the ball encounters faster speeds near the edge and slower speeds closer to the center. This phenomenon, called the Coriolis Effect, causes the path to bend. Our spinning planet causes a similar curving of moving wind and water, which is why hurricanes travel in curved paths on weather maps. 

Troubleshooting Tips
  • The larger and more level the turntable is, the better the effect. 
  • It’s also important that the surface be flat and free of dips and bumps. 
  • You can add a coat of latex paint with a roller to add grippiness. 
  • If the platform wobbles, try tightening the nut or true up the bicycle wheel. 
     
See It at the Exploratorium

This activity is based on the Exploratorium exhibit Turntable that features discs rolling on a spinning metal table.