Once again, our beloved Tinkerer in Residence Gever Tulley came to the Tinkering Studio for one of his explorations of materials and numerosity. This time, his weapon of choice was PVC pipes.
Gever showed up with 400 linear feet of 1/2" diameter, 10-foot long PVC pipes, and as a further contraint, decided to not cut down any of the pipe to a length smaller than 5 feet. We quickly realized that the only way to join pieces together was to drill holes in them, and lash them together with bailing wire. Zipties proved to be too flimsy, and would break under tension. We ended up making two main structures: one used the tension of the pipes agains each other to hold itself up, and the other used tension from a rope to keep from springing apart. And, of course, we had to try and suspend a kid (again) from one of our contraptions.

The initial idea takes shape: joining pipes together with bailing wire.

We made a quick jig to hold the pipes in place while we drilled holes into them.

Bailing wire and lots of twisting holds everything together.

The first structure starts taking shape: a pentagon base connected by 5 longer bent pipes becomes very sturdy.

We added more pipes radially without really knowing where we were going with it...

But eventually it became a structure solid enough to hand a swing from it!

Annie decided to have a go, and amazingly, the structure held! This created a line of kids all wanting to have their turn next.
Two more girls have a go.

Emboldened, we tried to see if we could life the whole structure up without it crumbling, with a kid inside. The answer (luckily) was yes!

The second structure we built, while not as exciting, was interesting because it used a completely different principle to hold itself together.

Cool knot.
For the rest of the photos, check out the slideshow on flickr.
