Skip to main content

Tinkering Sign Evolution

Ryan Ryan
June 16, 2011
Calculating...
Tinkering Sign Evolution

Since we've had a tinkering studio on the floor, we've been experimenting with different versions of a large sign to identify the space.

1st sign

We started with a movable sign that hung over the entrance to the space. The words 'the studio' were able to slide apart to squeeze another word in but we never took advantage of that. The sign worked well for the first iteration of the studio, but once we built out of the roof and back wall, the grand swoop of the overhang seemed like a perfect place for a sign.

sign1

In the beginning of this year, we tried a quick experiment with laser cut cardboard letters for the first two open make months. The font and the placement felt almost right but the sign wasn't quite visible enough from a distance and looked too much like a prototype. We made a laser cut wood version of the sign but didn't end up hanging that up.

In March, for metal month, we went in a different direction as Nicole sketched out cursive letters and we all helped to pound in iridescent blue nails. This sign worked to showcase real materials and fit in with the metal theme but was hard to see since we never quite got the right lighting.
IMG_0703
Now that summer has rolled around we're been trying to think of a way to make a semi-permanent sign that communicates the tinkering spirit through using real materials but also can be read from far away and clearly identifies the space. We wanted to return to the type of letters and hanging method of the first two months of the year, but something about the too clean laser cut plywood didn't seem right. So Walter and Nicole had the idea to trace the letters out on 2x4s and cut them on the band saw. We hung them a few inches off the roof to get some depth and tried to get the spacing just right before screwing them in.
IMG_0686
IMG_0692

So far we're happy with the way this looks and feels in the space. I guess, we'll see if this ends up being a permanent part of the tinkering studio or just another step in the prototyping process.

IMG_0695