I've really enjoyed reading the Coursera forum activity sharing write ups and reflection question discussions over the past five weeks. I saw one person post a question about the circuit board that controlled the toy she took apart, and although I don't have a direct answer as to how the board works, I wanted to share a way we've explored a similar problem in the past.
Here's a screen capture of the post describing her exploration with a board and a switch. I love the last line - "I need to know!"
I've often felt bewildered by the boards inside taken apart toys too. How do they control what they do, and what can you do with them once they're detached from their original device? They're incredibly powerful, but a total black box because you can't see what's moving where or controlling the various elements. Nicole had the idea of turning them into circuit board blocks by observing where the wires went to outputs in the toys, then attaching new wires and nails on a block to see if they could control other things.
They were tricky to construct because the wires were fragile and would sometimes pop off the board before you were ready to detach them. If you couldn't find the exact point where it was soldered on, it was unsalvageable (for us). For the ones where we were able to attach new wires to the original points, we tested them by hooking them up to lights and other motor driven toy parts. It was so fun to see toys moving back and forth or turning on and off on their own!
Circuit Board with Controller from The Tinkering Studio on Vimeo.
After a few tests in the Learning Studio with explainers, we decided to try them out on the floor and at Maker Faire. They were pretty fragile and required an extra level of facilitation to introduce them to visitors. For example, the controllers could be "fried" if you hook them up with too much power, so we provided battery packs that were the same voltage as the original toy and cautioned people against adding extra batteries.
After Maker Faire, most of the boards were in need of repairs. We're putting these prototypes on hold for now, but it was a great way to explore using parts of take apart toys that we usually discard, and gave me a whole lot more insight into their potential for future tinkering.

