Skip to main content

LEGO Battery/Motor Packs

Ryan Ryan
April 4, 2016
Calculating...
LEGO Battery/Motor Packs

IMG_0123As we are experimenting with LEGO art machines, one important consideration is the starting point materials that can quickly get people investigating the motions of the mark making machines. With scribbling machines, people usually start with a motor, one AA battery and a broccoli band. These basic elements provide the foundation for builders to add glue sticks for offset virbration and markers to create drawings. Although the LEGO art machines can't be so simple and straightforward, we're wanting to see how natural and unobtrusive we can make the starting elements. IMG_9830For the art machines, we have experimented with different ways to attach the motors to the rechargeable battery packs that we like. We think that providing some way to connect these two pieces in a simple yet flexible way will allow participants to spend more time working on creating their contraptions and less time trying to figure out the particularities of the LEGO system.

IMG_0212The challenge with these two pieces is that they both have the reverse studs on the bottom and the smaller motor that we prefer has limited places for technic pin attachments. For the first creatures that we made, we simply used zip-ties to attach the two pieces. This formed a strong connection but is not adjustable and doesn't provide any attachment points for pens, legs, and other appendages. IMG_0208The next simple solution came from Nicole who took two baseplates and hot-glued them back to back. This allowed for a super simple and fairly strong connection for the pieces, but when Amos from LEGO foundation came to visit a few weeks ago, he let us know that their designers discourage this kind of modification because it can get people stuck without more building options. So we kept pushing, hoping to find a solution that used only unmodified parts.

spin_2595Amos shared a frame system that he built for the motor and battery pack, wrapping them in a grid of technic bricks. When the entire system locks together, it's really strong and allows for many attachment points along all six sides of the components. We liked this direction but felt that the design was a little too bulky and heavy to give to participants as a 'starting point' element. IMG_0211Sebastian made the next advance using a little rubber LEGO piece (part 45590) with two cross-shaped holes on each end. With a system of technic beams, the rubber band securely holds the motor in place, yet the position can be adjusted by the builder. The frame is made entirely with LEGO parts though we're not sure how rare the rubber piece is or if it will hold up to workshops on the floor.

Our current favorite holder came out of a continuation of the frame idea while also going back to the simplicity of the hot-glued piece. While messing around with our selection of LEGO connectors, Sebastian came up with a way to use short technic pins to attach a baseplate in the reverse direction. Nicole made a stop motion animation showing how it's all put together.

spin_2597The holder has a lot of advantages in that it's slim, has ample places to add on other pieces, and uses all standard LEGO parts. There's still the issue that the mini peg parts seem to be pretty hard to find and we're still not clear on how reversing the studs will affect the building process. So far with the art machines, that hasn't been too much of an issue, but we'll keep an eye out for it. IMG_0087I think it's been an interesting process to come up with a starting point battery/motor holder design. With all the LEGO activities that we are developing, I have a feeling that we'll be trying out adding additional materials like zip-ties and rubber band, making custom pieces with hot glue or the 3D printer, and trying to find ways to work with the standard LEGO parts. As we refine the solutions we'll continue to document our designs using tools like the Spin turntable and think about how the prototypes could work across different settings. Through the process of experimentation and eventually testing our designs in the Tinkering Studio with visitors, we hope to continue to develop some robust and flexible solutions.